Skip to content
GitLab
Commit 882924fc authored by Ignacio Pisso's avatar Ignacio Pisso
Browse files

remove flexpart 9 options content

parent 5f2e8f68
Hide whitespace changes
Inline Side-by-side
flexpart90.info deleted 100644 → 0
View file @ 5f2e8f68
...is not flexpart77.
options/AGECLASSES deleted 100755 → 0
View file @ 5f2e8f68
************************************************
* *
*Lagrangian particle dispersion model FLEXPART *
* Please select your options *
* *
*This file determines the ageclasses to be used*
* *
*Ages are given in seconds. The first class *
*starts at age zero and goes up to the first *
*age specified. The last age gives the maximum *
*time a particle is carried in the simulation. *
* *
************************************************
1 Integer Number of age classes
1728000
options/COMMAND deleted 100644 → 0
View file @ 5f2e8f68
+++++++++++++ HEADER +++++++++++++++++
+++++++++++++ HEADER +++++++++++++++++
+++++++++++++ HEADER +++++++++++++++++
+++++++++++++ HEADER +++++++++++++++++
+++++++++++++ HEADER +++++++++++++++++
+++++++++++++ HEADER +++++++++++++++++
+++++++++++++ HEADER +++++++++++++++++
-1
20070930 180000
20070931 0
3600
3600
900
9999999
900 SYNC
-5.0 CTL
4 IFINE
5 IOUT
0 IPOUT
1 LSUBGRID
1 LCONVECTION
1 LAGESPECTRA
0 IPIN
1 IOFR
0 IFLUX
0 MDOMAINFILL
1 IND_SOURCE
2 IND_RECEPTOR
0 MQUASILAG
1 NESTED_OUTPUT
2 LINIT_COND INITIAL COND. FOR BW RUNS: 0=NO,1=MASS UNIT,2=MASS MIXING RATIO UNIT
options/COMMAND.alternative deleted 100755 → 0
View file @ 5f2e8f68
********************************************************************************
* *
* Input file for the Lagrangian particle dispersion model FLEXPART *
* Please select your options *
* *
********************************************************************************
1 LDIRECT 1 FOR FORWARD SIMULATION, -1 FOR BACKWARD SIMULATION
20040720 000000 YYYYMMDD HHMISS BEGINNING DATE OF SIMULATION
20040721 120000 YYYYMMDD HHMISS ENDING DATE OF SIMULATION
10800 SSSSS OUTPUT EVERY SSSSS SECONDS
10800 SSSSS TIME AVERAGE OF OUTPUT (IN SSSSS SECONDS)
900 SSSSS SAMPLING RATE OF OUTPUT (IN SSSSS SECONDS)
9999999 SSSSSSS TIME CONSTANT FOR PARTICLE SPLITTING (IN SECONDS)
900 SSSSS SYNCHRONISATION INTERVAL OF FLEXPART (IN SECONDS)
-5.0 CTL FACTOR, BY WHICH TIME STEP MUST BE SMALLER THAN TL
4 IFINE DECREASE OF TIME STEP FOR VERTICAL MOTION BY FACTOR IFINE
3 IOUT 1 CONC. (RESID. TIME FOR BACKWARD RUNS) OUTPUT,2 MIX. RATIO OUTPUT,3 BOTH,4 PLUME TRAJECT.,5=1+4
0 IPOUT PARTICLE DUMP: 0 NO, 1 EVERY OUTPUT INTERVAL, 2 ONLY AT END
1 LSUBGRID SUBGRID TERRAIN EFFECT PARAMETERIZATION: 1 YES, 0 NO
1 LCONVECTION CONVECTION: 1 YES, 0 NO
0 LAGESPECTRA AGE SPECTRA: 1 YES, 0 NO
0 IPIN CONTINUE SIMULATION WITH DUMPED PARTICLE DATA: 1 YES, 0 NO
0 IOUTPUTFOREACHREL CREATE AN OUPUT FILE FOR EACH RELEASE LOCATION: 1 YES, 0 NO
0 IFLUX CALCULATE FLUXES: 1 YES, 0 NO
0 MDOMAINFILL DOMAIN-FILLING TRAJECTORY OPTION: 1 YES, 0 NO
1 IND_SOURCE 1=MASS UNIT , 2=MASS MIXING RATIO UNIT
1 IND_RECEPTOR 1=MASS UNIT , 2=MASS MIXING RATIO UNIT
0 MQUASILAG QUASILAGRANGIAN MODE TO TRACK INDIVIDUAL PARTICLES: 1 YES, 0 NO
0 NESTED_OUTPUT SHALL NESTED OUTPUT BE USED? YES, 0 NO
2 LINIT_COND INITIAL COND. FOR BW RUNS: 0=NO,1=MASS UNIT,2=MASS MIXING RATIO UNIT
1. Simulation direction, 1 for forward, -1 for backward in time
2. Beginning date and time of simulation. Must be given in format
YYYYMMDD HHMISS, where YYYY is YEAR, MM is MONTH, DD is DAY, HH is HOUR,
MI is MINUTE and SS is SECOND. Current version utilizes UTC.
3. Ending date and time of simulation. Same format as 3.
4. Average concentrations are calculated every SSSSS seconds.
5. The average concentrations are time averages of SSSSS seconds
duration. If SSSSS is 0, instantaneous concentrations are outputted.
6. The concentrations are sampled every SSSSS seconds to calculate the time
average concentration. This period must be shorter than the averaging time.
7. Time constant for particle splitting. Particles are split into two
after SSSSS seconds, 2xSSSSS seconds, 4xSSSSS seconds, and so on.
8. All processes are synchronized with this time interval (lsynctime).
Therefore, all other time constants must be multiples of this value.
Output interval and time average of output must be at least twice lsynctime.
9. CTL must be >1 for time steps shorter than the Lagrangian time scale
If CTL<0, a purely random walk simulation is done
10.IFINE=Reduction factor for time step used for vertical wind
11.IOUT determines how the output shall be made: concentration
(ng/m3, Bq/m3), mixing ratio (pptv), or both, or plume trajectory mode,
or concentration + plume trajectory mode.
In plume trajectory mode, output is in the form of average trajectories.
12.IPOUT determines whether particle positions are outputted (in addition
to the gridded concentrations or mixing ratios) or not.
0=no output, 1 output every output interval, 2 only at end of the
simulation
13.Switch on/off subgridscale terrain parameterization (increase of
mixing heights due to subgridscale orographic variations)
14.Switch on/off the convection parameterization
15.Switch on/off the calculation of age spectra: if yes, the file AGECLASSES
must be available
16. If IPIN=1, a file "partposit_end" from a previous run must be available in
the output directory. Particle positions are read in and previous simulation
is continued. If IPIN=0, no particles from a previous run are used
17. IF IOUTPUTFOREACHRELEASE is set to 1, one output field for each location
in the RLEASE file is created. For backward calculation this should be
set to 1. For forward calculation both possibilities are applicable.
18. If IFLUX is set to 1, fluxes of each species through each of the output
boxes are calculated. Six fluxes, corresponding to northward, southward,
eastward, westward, upward and downward are calculated for each grid cell of
the output grid. The control surfaces are placed in the middle of each
output grid cell. If IFLUX is set to 0, no fluxes are determined.
19. If MDOMAINFILL is set to 1, the first box specified in file RELEASES is used
as the domain where domain-filling trajectory calculations are to be done.
Particles are initialized uniformly distributed (according to the air mass
distribution) in that domain at the beginning of the simulation, and are
created at the boundaries throughout the simulation period.
20. IND_SOURCE switches between different units for concentrations at the source
NOTE that in backward simulations the release of computational particles
takes place at the "receptor" and the sampling of particles at the "source".
1=mass units (for bwd-runs = concentration)
2=mass mixing ratio units
21. IND_RECEPTOR switches between different units for concentrations at the receptor
1=mass units (concentrations)
2=mass mixing ratio units
22. MQUASILAG indicates whether particles shall be numbered consecutively (1) or
with their release location number (0). The first option allows tracking of
individual particles using the partposit output files
23. NESTED_OUTPUT decides whether model output shall be made also for a nested
output field (normally with higher resolution)
24. LINIT_COND determines whether, for backward runs only, the sensitivity to initial
conditions shall be calculated and written to output files
0=no output, 1 or 2 determines in which units the initial conditions are provided.
options/COMMAND.reference deleted 100755 → 0
View file @ 5f2e8f68
********************************************************************************
* *
* Input file for the Lagrangian particle dispersion model FLEXPART *
* Please select your options *
* *
********************************************************************************
1. __ 3X, I2
1
LDIRECT 1 FOR FORWARD SIMULATION, -1 FOR BACKWARD SIMULATION
2. ________ ______ 3X, I8, 1X, I6
20040720 000000
YYYYMMDD HHMISS BEGINNING DATE OF SIMULATION
3. ________ ______ 3X, I8, 1X, I6
20040721 120000
YYYYMMDD HHMISS ENDING DATE OF SIMULATION
4. _____ 3X, I5
10800
SSSSS OUTPUT EVERY SSSSS SECONDS
5. _____ 3X, I5
10800
SSSSS TIME AVERAGE OF OUTPUT (IN SSSSS SECONDS)
6. _____ 3X, I5
900
SSSSS SAMPLING RATE OF OUTPUT (IN SSSSS SECONDS)
7. _________ 3X, I9
999999999
SSSSSSSSS TIME CONSTANT FOR PARTICLE SPLITTING (IN SECONDS)
8. _____ 3X, I5
900
SSSSS SYNCHRONISATION INTERVAL OF FLEXPART (IN SECONDS)
9. ---.-- 4X, F6.4
-5.0
CTL FACTOR, BY WHICH TIME STEP MUST BE SMALLER THAN TL
10. --- 4X, I3
4
IFINE DECREASE OF TIME STEP FOR VERTICAL MOTION BY FACTOR IFINE
11. - 4X, I1
3
IOUT 1 CONCENTRATION (RESIDENCE TIME FOR BACKWARD RUNS) OUTPUT, 2 MIXING RATIO OUTPUT, 3 BOTH,4 PLUME TRAJECT., 5=1+4
12. - 4X, I1
0
IPOUT PARTICLE DUMP: 0 NO, 1 EVERY OUTPUT INTERVAL, 2 ONLY AT END
13. _ 4X, I1
1
LSUBGRID SUBGRID TERRAIN EFFECT PARAMETERIZATION: 1 YES, 0 NO
14. _ 4X, I1
1
LCONVECTION CONVECTION: 1 YES, 0 NO
15. _ 4X, I1
0
LAGESPECTRA AGE SPECTRA: 1 YES, 0 NO
16. _ 4X, I1
0
IPIN CONTINUE SIMULATION WITH DUMPED PARTICLE DATA: 1 YES, 0 NO
17. _
0 4X,I1
IOFR IOUTPUTFOREACHREL CREATE AN OUPUT FILE FOR EACH RELEASE LOCATION: 1 YES, 0 NO
18. _ 4X, I1
0
IFLUX CALCULATE FLUXES: 1 YES, 0 NO
19. _ 4X, I1
0
MDOMAINFILL DOMAIN-FILLING TRAJECTORY OPTION: 1 YES, 0 NO, 2 STRAT. O3 TRACER
20. _ 4X, I1
1
IND_SOURCE 1=MASS UNIT , 2=MASS MIXING RATIO UNIT
21. _ 4X, I1
1
IND_RECEPTOR 1=MASS UNIT , 2=MASS MIXING RATIO UNIT
22. _ 4X, I1
0
MQUASILAG QUASILAGRANGIAN MODE TO TRACK INDIVIDUAL PARTICLES: 1 YES, 0 NO
23. _ 4X, I1
0
NESTED_OUTPUT SHALL NESTED OUTPUT BE USED? 1 YES, 0 NO
24. _ 4X, I1
2
LINIT_COND INITIAL COND. FOR BW RUNS: 0=NO,1=MASS UNIT,2=MASS MIXING RATIO UNIT
1. Simulation direction, 1 for forward, -1 for backward in time
(consult Seibert and Frank, 2004 for backward runs)
2. Beginning date and time of simulation. Must be given in format
YYYYMMDD HHMISS, where YYYY is YEAR, MM is MONTH, DD is DAY, HH is HOUR,
MI is MINUTE and SS is SECOND. Current version utilizes UTC.
3. Ending date and time of simulation. Same format as 3.
4. Average concentrations are calculated every SSSSS seconds.
5. The average concentrations are time averages of SSSSS seconds
duration. If SSSSS is 0, instantaneous concentrations are outputted.
6. The concentrations are sampled every SSSSS seconds to calculate the time
average concentration. This period must be shorter than the averaging time.
7. Time constant for particle splitting. Particles are split into two
after SSSSS seconds, 2xSSSSS seconds, 4xSSSSS seconds, and so on.
8. All processes are synchronized with this time interval (lsynctime).
Therefore, all other time constants must be multiples of this value.
Output interval and time average of output must be at least twice lsynctime.
9. CTL must be >1 for time steps shorter than the Lagrangian time scale
If CTL<0, a purely random walk simulation is done
10.IFINE=Reduction factor for time step used for vertical wind
11.IOUT determines how the output shall be made: concentration
(ng/m3, Bq/m3), mixing ratio (pptv), or both, or plume trajectory mode,
or concentration + plume trajectory mode.
In plume trajectory mode, output is in the form of average trajectories.
12.IPOUT determines whether particle positions are outputted (in addition
to the gridded concentrations or mixing ratios) or not.
0=no output, 1 output every output interval, 2 only at end of the
simulation
13.Switch on/off subgridscale terrain parameterization (increase of
mixing heights due to subgridscale orographic variations)
14.Switch on/off the convection parameterization
15.Switch on/off the calculation of age spectra: if yes, the file AGECLASSES
must be available
16. If IPIN=1, a file "partposit_end" from a previous run must be available in
the output directory. Particle positions are read in and previous simulation
is continued. If IPIN=0, no particles from a previous run are used
17. IF IOUTPUTFOREACHRELEASE is set to 1, one output field for each location
in the RLEASE file is created. For backward calculation this should be
set to 1. For forward calculation both possibilities are applicable.
18. If IFLUX is set to 1, fluxes of each species through each of the output
boxes are calculated. Six fluxes, corresponding to northward, southward,
eastward, westward, upward and downward are calculated for each grid cell of
the output grid. The control surfaces are placed in the middle of each
output grid cell. If IFLUX is set to 0, no fluxes are determined.
19. If MDOMAINFILL is set to 1, the first box specified in file RELEASES is used
as the domain where domain-filling trajectory calculations are to be done.
Particles are initialized uniformly distributed (according to the air mass
distribution) in that domain at the beginning of the simulation, and are
created at the boundaries throughout the simulation period.
20. IND_SOURCE switches between different units for concentrations at the source
NOTE that in backward simulations the release of computational particles
takes place at the "receptor" and the sampling of particles at the "source".
1=mass units (for bwd-runs = concentration)
2=mass mixing ratio units
21. IND_RECEPTOR switches between different units for concentrations at the receptor
1=mass units (concentrations)
2=mass mixing ratio units
22. MQUASILAG indicates whether particles shall be numbered consecutively (1) or
with their release location number (0). The first option allows tracking of
individual particles using the partposit output files
23. NESTED_OUTPUT decides whether model output shall be made also for a nested
output field (normally with higher resolution)
24. LINIT_COND determines whether, for backward runs only, the sensitivity to initial
conditions shall be calculated and written to output files
0=no output, 1 or 2 determines in which units the initial conditions are provided.
options/OUTGRID deleted 100755 → 0
View file @ 5f2e8f68
********************************************************************************
* *
* Input file for the Lagrangian particle dispersion model FLEXPART *
* Please specify your output grid *
* *
********************************************************************************
1. ------.---- 4X,F11.4
-179.0000 GEOGRAFICAL LONGITUDE OF LOWER LEFT CORNER OF OUTPUT GRID
OUTLONLEFT (left boundary of the first grid cell - not its centre)
2. ------.---- 4X,F11.4
-90.0000 GEOGRAFICAL LATITUDE OF LOWER LEFT CORNER OF OUTPUT GRID
OUTLATLOWER (lower boundary of the first grid cell - not its centre)
3. ----- 4X,I5
360 NUMBER OF GRID POINTS IN X DIRECTION (= No. of cells + 1)
NUMXGRID
4. ----- 4X,I5
180 NUMBER OF GRID POINTS IN Y DIRECTION (= No. of cells + 1)
NUMYGRID
5. ------.--- 4X,F10.3
1.000 GRID DISTANCE IN X DIRECTION
DXOUTLON
6. ------.--- 4X,F10.3
1.000 GRID DISTANCE IN Y DIRECTION
DYOUTLAT
10. -----.- 4X, F7.1
100.0
LEVEL 4 HEIGHT OF LEVEL (UPPER BOUNDARY)
10. -----.- 4X, F7.1
3000.0
LEVEL 4 HEIGHT OF LEVEL (UPPER BOUNDARY)
10. -----.- 4X, F7.1
50000.0
LEVEL 4 HEIGHT OF LEVEL (UPPER BOUNDARY)
options/OUTGRID_NEST deleted 100644 → 0
View file @ 5f2e8f68
********************************************************************************
* *
* Input file for the Lagrangian particle dispersion model FLEXPART *
* Please specify your output grid *
* *
********************************************************************************
1. ------.---- 4X,F11.4
-15.0000 GEOGRAFICAL LONGITUDE OF LOWER LEFT CORNER OF OUTPUT GRID
OUTLONLEFT (left boundary of the first grid cell - not its centre)
2. ------.---- 4X,F11.4
35.0000 GEOGRAFICAL LATITUDE OF LOWER LEFT CORNER OF OUTPUT GRID
OUTLATLOWER (lower boundary of the first grid cell - not its centre)
3. ----- 4X,I5
220 NUMBER OF GRID POINTS IN X DIRECTION (= No. of cells + 1)
NUMXGRID
4. ----- 4X,I5
120 NUMBER OF GRID POINTS IN Y DIRECTION (= No. of cells + 1)
NUMYGRID
5. ------.----- 4X,F12.5
0.25000 GRID DISTANCE IN X DIRECTION
DXOUTLON
6. ------.----- 4X,F12.5
0.25000 GRID DISTANCE IN Y DIRECTION
DYOUTLAT
options/RECEPTORS deleted 100755 → 0
View file @ 5f2e8f68
********************************************************************************
* *
* Input file for the Lagrangian particle dispersion model FLEXPART *
* Please specify your receptor points *
* For the receptor points, ground level concentrations are calculated *
* *
********************************************************************************
1. ---------------- 4X,A16
F15 NAME OF RECEPTOR POINT
RECEPTORNAME
2. ------.---- 4X,F11.4
6.1333 GEOGRAFICAL LONGITUDE
XRECEPTOR
3. ------.---- 4X,F11.4
49.0833 GEOGRAFICAL LATITUDE
YRECEPTOR
================================================================================
1. ---------------- 4X,A16
NL01 NAME OF RECEPTOR POINT
RECEPTORNAME
2. ------.---- 4X,F11.4
5.7833 GEOGRAFICAL LONGITUDE
XRECEPTOR
3. ------.---- 4X,F11.4
50.9167 GEOGRAFICAL LATITUDE
YRECEPTOR
================================================================================
1. ---------------- 4X,A16
B05 NAME OF RECEPTOR POINT
RECEPTORNAME
2. ------.---- 4X,F11.4
4.3500 GEOGRAFICAL LONGITUDE
XRECEPTOR
3. ------.---- 4X,F11.4
50.8000 GEOGRAFICAL LATITUDE
YRECEPTOR
================================================================================
1. ---------------- 4X,A16
D27 NAME OF RECEPTOR POINT
RECEPTORNAME
2. ------.---- 4X,F11.4
11.1333 GEOGRAFICAL LONGITUDE
XRECEPTOR
3. ------.---- 4X,F11.4
52.9667 GEOGRAFICAL LATITUDE
YRECEPTOR
================================================================================
1. ---------------- 4X,A16
D08 NAME OF RECEPTOR POINT
RECEPTORNAME
2. ------.---- 4X,F11.4
8.7000 GEOGRAFICAL LONGITUDE
XRECEPTOR
3. ------.---- 4X,F11.4
53.8667 GEOGRAFICAL LATITUDE
YRECEPTOR
================================================================================
1. ---------------- 4X,A16
DK05 NAME OF RECEPTOR POINT
RECEPTORNAME
2. ------.---- 4X,F11.4
8.1333 GEOGRAFICAL LONGITUDE
XRECEPTOR
3. ------.---- 4X,F11.4
56.0000 GEOGRAFICAL LATITUDE
YRECEPTOR
================================================================================
options/RELEASES deleted 100644 → 0
View file @ 5f2e8f68
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
+++++++++++++++++ HEADER ++++++++++++++++++++
5
31
31
31
31
31
20040101 080000
20040102 080000
8.2500
58.3833
8.2500
58.3833
1
0.000
100.000
4000
1
1
1
1
1
rel_bj
20040108 080000
20040109 080000
8.2500
58.3833
8.2500
58.3833
1
0.000
100.000
4000
1
1
1
1
1
rel_bj
20040115 080000
20040116 080000
8.2500
58.3833
8.2500
58.3833
1
0.000
100.000
4000
1
1
1
1
1
rel_bj
20040122 080000
20040123 080000
8.2500
58.3833
8.2500
58.3833
1
0.000
100.000
4000
1
1
1
1
1
rel_bj
20040129 080000
20040130 080000
8.2500
58.3833
8.2500
58.3833
1
0.000
100.000
4000
1
1
1
1
1
rel_bj
20040205 080000
20040206 080000
8.2500
58.3833
8.2500
58.3833
1
0.000
100.000
4000
1
1
1
1
1
rel_bj
20040212 080000
20040213 080000
8.2500
58.3833
8.2500
58.3833
1
0.000
100.000
4000
1